Club Car Precedent Street-Legal LED Light Kit- Instamatic®

Club Car Precedent Turn Signal Kit

Kit includes:

• LED Headlight Bar with Amber LED Turn Signals and two LED Tail Lights with Brake Lights
• Turn Signal Assembly, Horn, and Mechanical Brake Switch
• One Wiring Harness, One In-line Fuse, and One Push-pull Switch
• Instructions and Fasteners
• Gas Models Include Gas Harness (make selection above)
• Light Kits for Electric Models Newer than Mid 2008 Include Bucket Harness (make selection above)
• This FlexVolt™ light kit is designed to operate on 12-48 volts of power. No voltage reducer required! Save time and money!
  

Description:

This Club Car Precedent light kit includes all the components you will need to make your cart street legal in most areas.  This deluxe kit will provide peace of mind knowing those traveling near you will notice you and your loved ones.

You will receive a bright, energy efficient LED headlight assembly that features amber LED turn signals incorporated into the housing. The headlight assembly arrives pre-mounted to a new black bumper which allows you to easily mount your front headlight and bumper assembly. You will also receive bright LED tail lights, the wiring Sub-Harness, turn signal assembly, brake switch, brake timer relay, horn, and steering column cover to hide the turn signal assembly wiring. This kit does not require any large holes to be cut out in the body of the cart. Mounting the tail lights will only require a small hole to be placed in the rear fenders for the wiring to pass through.

You will need to select whether you have a gas or electric Precedent. If you have an electric Precedent, you will also need to select your year of manufacture. 

In addition to the above items, you will also receive the following in your kit if you own a gas model or an electric model built after the mid-2008 model year:

Electric Carts built after Mid-2008

• This kit will also include the Bucket Harness that will need to be installed in your cart. The Bucket Harness is basically the main wiring harness that you will install from under the dash area, underneath the floor mat, through the battery compartment, and to the taillights. Electric Precedents built after mid-2008 no longer had this harness installed from the factory.

Gas Carts

• The kit designed for the gas model includes a Gas Harness Adapter that you will need to connect the existing Bucket Harness to the Sub-Harness you will be receiving in your kit.

Tech Specs:

• Gas and electric cart compatible (make selection above to ensure you receive the correct wiring harnesses)
• Operating voltage: 12 volt minimum | 48 volt maximum (*no voltage reducer required)
• Operating amperage draw: 1-2 amps
• Wire loom with the following connection ports:
• Driver and passenger headlights
• Driver and passenger taillights
• Battery(ies): Ring terminal connections
• Golf cart turn signal kit
• Brake kit assembly
• Horn
• Push/pull switch

Who is this golf cart light kit for?

Designed for customers who want bright reliable lighting and signaling capability. Beneficial for street-legal certification* and customers who primarily drive their golf carts in these types of locations:

• Neighborhoods and residential areas
• Golf course communities
• Resorts
• Areas with high foot and vehicle traffic

*Check with state and local ordinances before using your golf cart on any public roadways*

Club Car Precedent Light Kit Installation Overview (Street-Legal):

Although there are a few more components to install than our basic light kit, you will still be able to get your Club Car street-legal kit installed in no time!

To ensure your installation goes smoothly and you receive the correct wiring harnesses, make sure you select the correct golf cart type (gas or electric) along with the correct year. See above for me details.

You will receive instructions in your kit that will walk you through every step required for installation. Here, we will review some of the major installation steps you will be required to perform.

• First, you will need to replace your OEM bumper with our new LED headlight and bumper combo.  This is as simple as removing two nuts and bolts, removing the old bumper, and sliding our new one back on. 

• For the taillight installation, you will need to drill two small holes on the driver and passenger sides of your cart to allow for the wiring to pass through your golf cart body.

• In addition to the light installation, you will also have to install the necessary wiring harnesses. Depending on whether your Club Car Precedent is gas or electric and depending on the year of manufacturer you will either need to locate the pre-installed bucket harness or run the one provided in your kit. 

• All Precedent carts will also have to install sub-harness wiring under their dash and if you have a gas powered Precedent cart you will also have to install the gas harness adapter as well. Some of the attachment points for the main wiring harnesses and street-legal accessories are as follows: