Available For the Following Models
Club Car: DS | Precedent | Tempo / Onward
EZGO: TXT | RXV | Marathon
Yamaha: G14 | G16 | G19 | G20 | G22 | G29 (Drive) | Drive2
Seamless, thermoformed vinyl upholstery for All Golf Cart Models
• Domestically produced and is of OEM construction: long term resistance to the sun's UV rays, highly mildew resistant, will not crack in temperatures as low as -20 degrees F. Meets FMVSS302 & CAL117 fire code.
• Seamless, factory style upholstery with matching OEM line or "welt" patterns
• NO thread that becomes brittle and breaks
• NO point of entry for moisture to seep
You can absolutely install your new golf cart seat covers without removing the old ones! However, if your old covers are dry and cracking or have any sort of mold/mildew we strongly recommend removing them prior to installing the new covers.
There are a few things you will need when installing your new seat covers.
When installing new golf cart seat covers, the first thing you will want to do is get your new covers warmed up. You can either place them in the warm sun for 20-30 minutes or throw them in your dryer on a low setting for 5-10 minutes. Warming up the covers will ensure they are nice and pliable and help the installation process go smoothly. After that, place the new cover face down on a clean flat surface. You will then put the old seat on the backside of the cover. Be sure to check that the top side of the cover and the top side of the seat line up correctly. You don't want random loose sections in your cover because they are flipped upside down and not aligned top and bottom. To ensure proper coverage before stapling, check all four corners of the old seat/new cover and look to see that all four corners have similar amounts of extra fabric. You will also want to check the seems of the cover and make sure they aligned correctly on the edges of the seat. Once that is completed, find a corner, fold that edge down and attach. At this point, you will continue the same process on all four corners, starting with the opposite corner of the one you just attached. Connecting the seat cover in a star pattern helps keep the cover from sliding in one direction. Before every attachment, check that the seat cover is lined up correctly and has not moved out of position. Once you have the four corners attached, move to the top of the cover and repeat. Lastly, move to the bottom portion of the seat, and guess what... do it again! Finish installing by slowly moving around the edge of the seat and pulling the covers tightly across, continuously checking that the covers are still in the proper position.
The best way to clean your covers is with mild soap and water. This solution gets the job done and protects your covers from any harsh chemicals that could damage them.